Brought my Wake-On-LAN setup from WhiteRussian 0.9 to Kamikaze 8.0.9 rev 16650 with WebIf rev 4767 (now on a
WRT350Nv2).
I use /etc/ethers to define the static IPs for my devices.
Unfortunately these definitions are no more displayed on the Wake-On-Lan page of WebIf.
Only static IPs via uci are displayed.
Hence I would suggest that WebIf also displays the definitions of /etc/ethers, if dhcp.@dnsmasq[n].readethers=1 is set.
Regards
Maddes
P.S.:
I have to use /etc/ethers as it is the only way to define the same static IP for two different Mac addresses. This is not allowed via uci although dnsmasq allows it.
Example: The Roku Soundbridge can connect either via ethernet or via wifi / w-lan.
00:0d:4b:21:xx:yy 192.168.1.11
00:0d:4b:20:xx:yy 192.168.1.11
